RESPUESTA INELÁSTICA DE MARCOS DÚCTILES CON CONTRAVIENTO EXCÉNTRICO

Autores/as

  • Jesús Salvador García Carrera Instituto Nacional de Electricidad y Energías Limpias, INEEL
  • Edgar Tapia Hernández Universidad Autónoma Metropolitana - Acz. http://orcid.org/0000-0003-4269-180X

DOI:

https://doi.org/10.18867/ris.100.478

Resumen

En este artículo se discuten los resultados de análisis inelásticos estáticos y dinámicos de edificios regulares de 6 y 9 pisos estructurados con marcos de acero dúctiles con contraventeo excéntrico. Las estructuras se analizaron mediante modelos detallados en OpenSees. Los resultados señalan que los marcos con contravientos excéntricos de mediana altura diseñados conforme a los principios de capacidad podrían desarrollar un comportamiento indeseable, caracterizados por una concentración de daño. Con el propósito de mejorar el conocimiento adquirido, se evaluaron con detalle los parámetros y capacidades inelásticas del sistema estructural.

Descargas

Los datos de descargas todavía no están disponibles.

Biografía del autor/a

Jesús Salvador García Carrera, Instituto Nacional de Electricidad y Energías Limpias, INEEL

Investigador. Instituto Nacional de Electricidad y Energías Limpias, Gerencia de Ingeniería Civil. Reforma 113, Col. Palmira, Cuernavaca, Morelos. C.P. 62490.

Edgar Tapia Hernández, Universidad Autónoma Metropolitana - Acz.

Profesor - Investigador. Área de Sustentabilidad y Desarrollo tecnológico. Universidad Autónoma Metropolitana - Azcapotzalco desde 2006.

Estancia de investigación, Ecole Polytechnique de Montreal, Canadá. 2008-2009.

Profesor visitante. Universidad de California en San Diego, Estados Unidos. 2014.

Citas

AISC 341-16 (2016), “Seismic provisions for structural steel buildings”, American Institute of Steel Construction, Chicago, IL.

Base Mexicana de Sismos Fuertes. (2000). Comite de la Base Nacional de datos de sismos fuertes, CD-ROM, Volumen 2.

Berman J. y Bruneau M. (2006), “Experimental and analytical investigation of tubular braced frames”, Engineering Structures, No. 29. Pp. 1929 – 1938. https://doi.org/10.1016/j.engstruct.2006.10.012

Bosco M. y Rossi P.P. (2009), “Seismic behavior of eccentrically braced frames”, Engineering Structures, No. 31, pp. 664-674. https://doi.org/10.1016/j.engstruct.2008.11.002

CNBC-05. (2005), National Building Code – Canada 2005. Volume 1. Canadian Committee of Building Codes and Fire Prevention. National Council Research, 12th. Ed. Ottawa, ON

Dubina D., Stratan A. y Dinu F. (2008). Dual high-strength steel eccentrically braced frames with removable links, Earthquake Engineering and Structural Dynamics, Vol. 37, pp. 1703–1720. https://doi.org/10.1002/eqe.828

FEMA-356 (2000). Prestandard and Commentary for the Seismic Rehabilitation of Building, Federal Emergency Management Agency, Washintong, D.C.

García J. S. (2015). Respuesta inelástica de edificios regulares estructurados con marcos dúctiles de acero, Tesis de Maestría, Posgrado en Ingeniería Estructural, Universidad Autónoma Metropolitana, Unidad Azcapotzalco, Septiembre. México.

García J. S. y Tapia E. (2014). Observaciones sobre el diseño de la viga enlace en marcos de acero con contraventeo excentrico”, Memorias XIX Congreso Nacional de Ingenería Sísmica¸ Sociedad Mexicana de Ingeniería Estructural. Puerto Vallarta, Jal.

Gutiérrez I. y Tapia E. (2014). Influencia de los modos superiores en la respuesta inelástica de edificios estructurados con marcos dúctiles de acero, Memorias XIX Congreso Nacional de Ingenería Sísmica¸ Sociedad Mexicana de Ingeniería Estructural. Puerto Vallarta, Jal.

Hamid S. (2011). Ductility and ultimate strength of eccentric braced frame. International Conference on Advanced Materials Engineering, IPCSIT, Vol. 15, pp. 68-74.

IMCA. (2014), Manual de Construcción en Acero, Instituto Mexicano para la Construcción en Acero (IMCA), 5a. Edición, Ed. Limusa. México.

Ji X., Ma Q., Wang Y. y Okazaki T. (2014). Ciclyc behavior of steel shear links used in replaceable coupling beams, 10h U.S. National Conference on Earthquake Engineering, EERI, Memorias, Anchore, Alaska, July.

Kasai K. y Popov E. (1986). Cyclic web buckling control for shear link beams, Journal of Structural Engineering, Vol. 112, pp. 505-523. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:3(505)

Koboevic S. y Olivia S. (2010). Design and seismic behavior of taller eccentrically braced frames, Canadian Journal of Civil Engineering. Vol. 37, pp. 195-208. https://doi.org/10.1139/L09-131

Malley J.O. y Popov E.P. (1984), “Shear links in eccentrically braced frames”, Journal of Structural Engineering. ASCE, Vol. 110. No. 9, pp. 2275-2295. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:9(2275)

Mansour N. (2010). Development of the design of eccentrically braced frames with replaceable shear links, Tesis Doctoral, Departamento de Ingeniería Civil, Universidad de Toronto.

Mazzoni S., McKenna F., Scott M. y Fenves G. (2006). Open system for earthquake engineering simulation, user command-language manual, Report NEES grid-TR 2004-21. Pacific Earthquake Engineering Research, University of California. Berkeley, CA. http://opensees.berkeley.edu.

MDOC-08 (2008). Comisión Federal de Electricidad – Instituto de Investigaciones Eléctricas, Capitulo de Diseño por Sismo, Manual de Diseño de Obras Civiles. México.

NTC-DCEA-17 (2017). Normas Técnicas Complementarias para el Diseño y Construcción de Estructuras de Acero. En Gaceta Oficial de la Ciudad de México. No. 220Bis. Vigésima época. Gobierno de la Ciudad de México. Diciembre.

NTC-DS-17 (2017). Normas Técnicas Complementarias sobre Diseño por Sismo. En Gaceta Oficial de la Ciudad de México. No. 220Bis. Vigésima época. Gobierno de la Ciudad de México. Diciembre.

Okazaki T., Engelhardt M. D., Drolias A., Schell E., Hong J. K. y Uang C. M. (2009). Experimental investigation of link-to-column connections in eccentrically braced frames, Journal of Construction Steel Research, Vol. 65, pp. 1401 – 1412. https://doi.org/10.1016/j.jcsr.2009.02.003

Popov E. P. y Engelhardt M. D. (1988). Seismic eccentrically braced frames, Journal of Constructional Steel Research, Vol. 10, pp. 321–354. https://doi.org/10.1016/0143-974X(88)90034-X

Prinz G. (2010), “Using buckling-restrained braces in eccentric configurations”, Tesis Doctoral, Departamento de Ingeniería Civil y Ambiental, Universidad Brigham Young

Ramadan T. y Ghobarah A. (1995), “Analytical model for shear-link behavior”, Journal of Structural Engineering, ASCE. Vol. 121, No. 11, pp. 1574-1580. DOI: 10.1061/(ASCE)0733-9445(1995)121:11(1574)

Richards, P. y Uang, C. M. (2004). Development of testing protocol for links in eccentrically braced frames, 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada.

Roeder C.W. y Popov E.P. (1978), “Eccentrically braced Steel frames for earthquakes”, Journal of Structural Engineering. ASCE, Vol. 110. No. 2, pp. 340-354. https://doi.org/10.1016/0141-0296(83)90034-2

Rozon J., Kovoebic S. y Tremblay R. (2008). Study of global behavior of eccentrically braced frames in response to seismic loads, 14th World Conference on Earthquake Engineering, Beijing, China. Octubre.

Stratan A., Dogariu A. y Dubina D. (2007), Bolted links for eccentrically braced frames: influence of link stiffness, Proc. of the Fifth AISC / ECCS International Workshop "Connections in Steel Structures V. Behaviour, Strength & Design", June 3-5, 2004. Ed. F.S.K. Bijlaard, A.M. Gresnigt, G.J. van der Vegte. Delft University of Technology, The Netherlands. ISBN: 978-90-9019809-5, pp. 223-232.

Terzic V. (2013). Modeling SCB frame using beam – columns elements. Seminario de OpenSees, presentación. http://opensees.berkeley.edu/

Tapia E. y Tena A. (2013). Diseño sísmico de marcos de acero contraventeados. Parte 2: Evaluación de la metodología. Revista de Ingeniería Sísmica. Vol. 88, pp. 69-90.

Tapia E., García S. y Del Rincón A. (2016). Estudio paramétrico del modelado de contravientos de acero. Revista de Ingeniería Sísmica 94, pp. 49-74.

Tapia E. y Gutiérrez S. (2016), "Respuesta inelástica de marcos dúctiles de acero ante patrones de carga”. Revista Internacional de Ingeniería de Estructuras. Vol. 21. No. 1. Pp. 105-122.

Publicado

2019-07-06

Cómo citar

García Carrera, J. S., & Tapia Hernández, E. (2019). RESPUESTA INELÁSTICA DE MARCOS DÚCTILES CON CONTRAVIENTO EXCÉNTRICO. Revista De Ingeniería Sísmica , (100), 51–70. https://doi.org/10.18867/ris.100.478

Métrica

Artículos más leídos del mismo autor/a