DISEÑO BASADO EN DESPLAZAMIENTOS DE EDIFICACIONES BAJAS RIGIDIZADAS CON CONTRAVIENTOS DESADHERIDOS

Autores/as

  • Amador Terán Gilmore Universidad Autónoma Metropolitana
  • Neftalí Virto Cambray Alonso y Asociados

DOI:

https://doi.org/10.18867/ris.80.55

Resumen

Se presenta una metodología basada en el control del desplazamiento lateral para el diseño por desempeño de un sistema de contravientos desadheridos y la estructura que los recibe. La metodología aplica al caso de estructuras de baja altura, cuyo comportamiento se caracteriza por no exhibir efectos importantes de flexión a nivel global. Se aplica la metodología propuesta para el  diseño sísmico de una edificación de cinco pisos ubicada en la Zona del Lago del D.F. A partir de  evaluar las características mecánicas globales de dicha edificación, y de evaluar el desempeño  sísmico de la misma ante excitaciones sísmicas generadas en esa zona, se concluye que la  metodología propuesta da lugar a un nivel adecuado de diseño sismorresistente.

Descargas

Los datos de descargas todavía no están disponibles.

Citas

Applied Technology Council (1998), “FEMA 306. Evaluation of earthquake damaged concrete and

masonry wall buildings”, ATC-43 Project.

Arroyo, D y M Ordaz (2007), “Hysteretic Energy Demands for SDOF Systems Subjected to Narrow Band Earthquake Ground Motions. Applications to the Lake Bed Zone of Mexico City”, Journal of Earthquake Engineering, 11, 147-165.

Badillo, A H (2000) “Criterio de diseño sísmico por desempeño para reforzar edificios con disipadores de energía” Tesis de Maestría, Universidad Nacional Autónoma de México.

Bentz, E y M P Collins (2000), “Response 2000”, http://www.ecf.utoronto.ca/~bentz.

Bertero, V V, Anderson, J C , Krawinkler, H y E Miranda (1991), “Design guidelines for ductility and drift limits: review of state-of-the-practice and state-of-the-art in ductility and drift-based earthquake- resistant design of buildings”, Reporte UCB/EERC-91/15, Universidad de California en Berkeley.

Bertero, V V (1997), “Performance-based seismic engineering: A critical review of proposed guidelines”, Seismic Design Methodologies for the Next Generation of Codes, Slovenia, Memorias, 1-31.

Black, C, Makris, N y I Aiken (2002), “Component Testing, stability analysis and characterization of

buckling-restrained unbounded braces”, Reporte PEER 2002/08, Universidad de California en Berkeley.

Bojórquez, E y S E Ruiz (2004) “Strength reduction factors for the valley of Mexico taking into account

low cycle fatigue effects”, 13th World Conference on Earthquake Engineering, Memorias, Artículo 516.

Chen, C H, Hsiao, P C, Lai, J W, Lin, M L, Weng, Y T y K C Tsai (2004), “Pseudo-dynamic test of a full-scale CFT/BRB frame: Part 2 — Construction and testing”, 13th World Conference on Earthquake Engineering, Memorias, Artículo 2175.

Chopra, A K (2001), “Dynamics of structures, Theory and applications to earthquake engineering”, Editorial Prentice Hall, Segunda Edición.

Clark, P, Kasai, K, Aiken, I y I Kimura (2000), “Evaluation of Design Methodologies for Structures Incorporating Steel Unbonded Braces for Energy Dissipation,” 12th World Conference on Earthquake Engineering, Memorias, Artículo 2240.

Federal Emergency Management Agency (2000), “FEMA 356, Prestandard and commentary for the

seismic rehabilitation of buildings”.

Huerta-Garnica, B y E Reinoso-Angulo (2002), “Espectros de energía de movimientos fuertes registrados en México”, Revista de Ingeniería Sísmica, 66, 45-72.

Ko, E, Mole, A, Aiken, I, Tajirian, F, Rubel, Z y I Kimura (2002), “Application of the unbonded brace in

medical facilities”, 7th National Conference on Earthquake Engineering, Memorias, Artículo 514.

Lopez, W, Gwie, D, Saunders, M y T Lauck (2002), “Lessons learned from large-scale tests of unbonded braced frame subassemblage”, SEAOC 71st Annual Convention, Memorias.

Mahin, S, Uriz, P, Aiken, I, Field, C y E Ko (2004), “Seismic performance of buckling restrained braced

frame systems”, 13th World Conference on Earthquake Engineering, Memorias, Artículo 1681.

Panagiotakos, T B y M N Fardis (2001), “Deformations of reinforced concrete members at yielding and ultimate”, ACI Structural Journal, 98(2), 135-148.

Pantazopoulou, S J y C W French (2001), “Slab participation in practical earthquake design of reinforced concrete frames”, ACI Structural Journal, 98 (4), 479-489.

Prakash, V, Powell, G H y S Campbell (1993), “DRAIN-2DX Base program description and user guide”,

Reporte UCB/SEMM-93/17, Universidad de California en Berkeley.

Qi, X y J P Moehle (1991), “Displacement design approach for reinforced concrete structures subjected to earthquakes”, Reporte No. UCB/EERC-91/02, Universidad de California en Berkeley.

Reyes Salinas, C (1999), “El estado límite de servicio en el diseño sísmico de edificios”, Tesis de

Doctorado, Universidad Nacional Autónoma de México.

Rodriguez, M E y J C Aristizabal (1999), “Evaluation of a seismic damage parameter”, Earthquake

Engineering and Structural Dynamics, 28, 463-477.

Sánchez-Badillo, A y A Terán-Gilmore (2008), “Diseño por desempeño de estructuras dúctiles de concreto reforzado ubicadas en la Zona del Lago del D.F.: ejemplo de aplicación”, Revista de Ingeniería Sísmica, artículo aceptado para publicación.

Terán-Gilmore, A (1998), “Características mecánicas y desempeño sísmico de marcos dúctiles de

concreto reforzado”, XI Congreso Nacional de Ingeniería Estructural, I, 564-573.

Terán-Gilmore, A (2004), “On the use of spectra to establish damage control in regular frames during

global predesign”, Earthquake Spectra, 20(3), 1-26.

Terán-Gilmore, A y M Espinoza-Johnson (2008), “Diseño por desempeño de estructuras dúctiles de

concreto reforzado ubicadas en la Zona del Lago del D.F.: la resistencia lateral de diseño”, Revista de Ingeniería Sísmica, artículo aceptado para publicación.

Terán-Gilmore, A y R Simón (2008), “Use of cumulative ductility spectra within a deformation-control format for seismic design of ductile structures subjected to long duration motions”, Journal of Earthquake Engineering, 12, 136-151.

Terán-Gilmore, A y N Bahena-Arredondo (2008), “Cumulative ductility spectra for seismic design of

ductile structures subjected to long duration motions: concept and theoretical background”, Journal of Earthquake Engineering, 12, 152-172.

Tremblay, R, Degrange, G y J Blouin (1999), “Seismic rehabilitation of a four-story building with a

stiffened bracing system”, 8th Canadian Conference on Earthquake Engineering, Memorias.

Tremblay, R, Bolduc, P, Neville, R y R DeVall (2006), “Seismic testing and performance of buckling- restrained bracing systems”, Canadian Journal of Civil Engineering, 33, 183-198.

Uang, C M y M Nakashima (2003), “Steel buckling-restrained braced frames”, Earthquake Engineering: Recent Advances and Applications, Capítulo 16, CRC Press.

Uang, C M y S Kiggins (2003), “Reducing residual drift of buckling-restrained braced frames as a dual

system”, International Workshop on Steel and Concrete Composite Construction (IWSCCC-2003),

Reporte No. NCREE-03-026, 189-198.

Virto, N (2006), “Sistema Pasivo de disipación de energía para edificios de mediana altura desplantados e la Zona del Lago del D.F.”, Tesis de Maestría, Universidad Autónoma Metropolitana.

Watanabe, A, Hitomi, Y, Saeki, E, Wada, A y M Fujimoto (1988), “Properties of Brace Encased in Buckling-Restraining Concrete and Steel Tube.” 9th World Conference on Earthquake Engineering, Memorias, IV, 719-724.

Publicado

2009-01-01

Cómo citar

Terán Gilmore, A., & Virto Cambray, N. (2009). DISEÑO BASADO EN DESPLAZAMIENTOS DE EDIFICACIONES BAJAS RIGIDIZADAS CON CONTRAVIENTOS DESADHERIDOS. Revista De Ingeniería Sísmica , (80), 1–29. https://doi.org/10.18867/ris.80.55

Número

Sección

Artículos

Métrica

Artículos más leídos del mismo autor/a

1 2 > >>